DDUtil (Data Decoder Utility)
DDUtil (Data Decoder Utility)
System Dependencies
Minimum PowerSDR Version:
1.10.0
Applicable Hardware:
N/A
Content provided by:
FlexRadio Systems Engineering
DDUtil, is a software package which is short for
Data Decoder Utility
.
DDUtil
was designed to enhance the operating experience for Flex Radio users by providing advanced connectivity to peripheral equipment not before available.
DDUtil
provides the automation required to decode and present transmit frequency data to select frequency sensitive devices such as linear amplifiers, antenna controllers (SteppIR), antenna tuners, antenna band switchers, etc. DDUtil may be used in a stand-alone mode or with up to four (4) Radio Control Programs
(RCP)
running simultaneously.
In brief DDUtil will connect to PowerSDR, poll it for transmit frequency data and then furnish it to your RS-232 and/or BCD band switching devices.
For example it will band switch a Yaesu Quadra and PW1 amplifiers, a SteppIR antenna controller and a Palstar AT-Auto tuner all at the same time. If you want to run a radio control program such as HRD or DXLabs or MixW it will change modes and pass all commands from the radio control program to PowerSDR and still provide the passive listener devices frequency data.
For more information, see the DDUtil Wiki page URL below.
This KB article may reference additional files that are available on the FlexRadio Systems web site Downloads page. Please use the URL(s) below to download the referenced materials.
An Adobe Acrobat Reader may be required to open the file. You can download Adobe Acrobat from here.
KB Source Document(s):
DDUtil Wiki page
Posted Tuesday, July 08, 2008
by
Administrator
http://kc.flex-radio.com/KnowledgebaseArticle50065.aspx