FLEX-5000 Balanced Line-In to W2IHY Audio Interface Configuration

FLEX-5000 Balanced Line-In to W2IHY Audio Interface Configuration

System Dependencies
Minimum PowerSDR Version:	N/A
Applicable Hardware:	FLEX-5000

Content provided by: FlexRadio Systems Engineering & W2IHY

The following wiring diagram represents how to wire the FLEX-5000 Balanced Line-In (1/4" TRS) and PTT to the W2IHY EQplus and the 8-Band EQ using the 5-pin DIN connector.

NOTE: Connect the GROUND (GND) to the cable shield but do not connect it to the shield of the DIN connector

This KB article may reference additional files that are available on the FlexRadio Systems web site Downloads page. Please use the URL(s) below to download the referenced materials.

An Adobe Acrobat Reader may be required to open the file.You can download Adobe Acrobat from here.

KB Source Document(s):

None Referenced

Posted Friday, July 15, 2011 by Administrator
http://kc.flex-radio.com/KnowledgebaseArticle50502.aspx